Product Description
Palmgren 2-7/16" Drill Press Vise 12253
USA MADE
Features:
•These versatile drill press vises are just what you need for drilling, tapping, reaming, etc. They are available in sizes ranging from 1-1/2 inch through 6 inches.
•All vises can be turned on either side or placed on end for general use.
•Made from 30,000 PSI tensile strength, fine grain cast iron.
•Vises have replaceable steel jaw plates.
•Center of base is open for holding work through body of vise.
•Base and bed parallel to 0.001 inch
Specifications
•Jaw Width 2-7/16"
•Jaw Opening 2-1/2"
•Throat Depth 1-1/2"
•Jaw Deflection: 0.002 inches at 2000 lbs.
•Grooved Jaw
•Lead Screw Type: V-Thread
•Vise Height 2-9/16"
LIFETIME WARRENTY
USA MADE
Features:
•These versatile drill press vises are just what you need for drilling, tapping, reaming, etc. They are available in sizes ranging from 1-1/2 inch through 6 inches.
•All vises can be turned on either side or placed on end for general use.
•Made from 30,000 PSI tensile strength, fine grain cast iron.
•Vises have replaceable steel jaw plates.
•Center of base is open for holding work through body of vise.
•Base and bed parallel to 0.001 inch
Specifications
•Jaw Width 2-7/16"
•Jaw Opening 2-1/2"
•Throat Depth 1-1/2"
•Jaw Deflection: 0.002 inches at 2000 lbs.
•Grooved Jaw
•Lead Screw Type: V-Thread
•Vise Height 2-9/16"
LIFETIME WARRENTY
