Product Description
DS12V 12″ Disc Sander with vacuum base is outfitted with a 1HP 1PH 110V drive motor. 3PH DS12 is available.
DS12V 12″ disc sander with vacuum base has an enclosed base housing a 100 CFM vacuum dust collector to help contain abrasive particles produced during sanding.
This can greatly improve the environmental conditions inside a shop. A door in the base allows easy access to the cloth bag filter, which can be removed, shaken out and easily replaced. Other features include a steel work table that tilts down to 45 degrees and up to 90 degrees, a 1 HP, 1 PH 110V direct drive motor, and a 12-inch diameter disc holder that accepts peel and stick PSA abrasive discs.
DS12V 12″ Disc Sander with vacuum base is great for quick deburring jobs on both ferrous metals (steel) or non ferrous materials (aluminum, wood, plastic, etc).
DS12V 12″ disc sander with vacuum base helps keep dust down with this vacuum base disc sander.
Steel work table tilts down to 45 degrees and up to 90 degrees. Access door in the vacuum base for easy clean out!
The cloth bag filter over the flow thru vacuum motor can be removed, shaken out and easily replaced. The 1 hp motor directly drives the 12″ diameter disc.
PSA adhesive discs are fast to replace, just peel and stick the 12″ abrasive disc to the aluminum disc holder and you are ready to run!
This product has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments.
Complete with enclosed stand and 100 CFM vacuum dust collector.
1 HP, 1 PH 110V, Dims: L12″ x W14″ x H46″
cloth filter bag # 5X878
Wt:150 lbs.
Model: DS12V
Made in USA !!
DS12V 12″ disc sander with vacuum base has an enclosed base housing a 100 CFM vacuum dust collector to help contain abrasive particles produced during sanding.
This can greatly improve the environmental conditions inside a shop. A door in the base allows easy access to the cloth bag filter, which can be removed, shaken out and easily replaced. Other features include a steel work table that tilts down to 45 degrees and up to 90 degrees, a 1 HP, 1 PH 110V direct drive motor, and a 12-inch diameter disc holder that accepts peel and stick PSA abrasive discs.
DS12V 12″ Disc Sander with vacuum base is great for quick deburring jobs on both ferrous metals (steel) or non ferrous materials (aluminum, wood, plastic, etc).
DS12V 12″ disc sander with vacuum base helps keep dust down with this vacuum base disc sander.
Steel work table tilts down to 45 degrees and up to 90 degrees. Access door in the vacuum base for easy clean out!
The cloth bag filter over the flow thru vacuum motor can be removed, shaken out and easily replaced. The 1 hp motor directly drives the 12″ diameter disc.
PSA adhesive discs are fast to replace, just peel and stick the 12″ abrasive disc to the aluminum disc holder and you are ready to run!
This product has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments.
Complete with enclosed stand and 100 CFM vacuum dust collector.
1 HP, 1 PH 110V, Dims: L12″ x W14″ x H46″
cloth filter bag # 5X878
Wt:150 lbs.
Model: DS12V
Made in USA !!
